Text Output¶

Besides providing dimensional analysis and unit conversions, the library also tries hard to print any quantity in the most user-friendly way. We can print the entire quantity or its selected parts (numerical value, unit, or dimension).

Note

The library does not provide a text output for quantity points. The quantity stored inside is just an implementation detail of this type. It is a vector from a specific origin. Without the knowledge of the origin, the vector by itself is useless as we can't determine which point it describes.

In the current library design, point origin does not provide any text in its definition. Even if we could add such information to the point's definition, we would not know how to output it in the text. There may be many ways to do it. For example, should we prepend or append the origin part to the quantity text?

For example, the text output of 42 m for a quantity point may mean many things. It may be an offset from the mountain top, sea level, or maybe the center of Mars. Printing 42 m AMSL for altitudes above mean sea level is a much better solution, but the library does not have enough information to print it that way by itself.

Please let us know if you have a good idea of how to solve this issue.

Predefined symbols¶

The definitions of dimensions, units, prefixes, and constants require assigning text symbols for each entity. Those symbols will be composed by the library's framework to express dimensions and units of derived quantities.

DimensionsUnitsPrefixesConstants

inline constexpr struct dim_length final : base_dimension<"L"> {} dim_length;
inline constexpr struct dim_mass final : base_dimension<"M"> {} dim_mass;
inline constexpr struct dim_time final : base_dimension<"T"> {} dim_time;
inline constexpr struct dim_electric_current final : base_dimension<"I"> {} dim_electric_current;
inline constexpr struct dim_thermodynamic_temperature final : base_dimension<{u8"Θ", "O"}> {} dim_thermodynamic_temperature;
inline constexpr struct dim_amount_of_substance final : base_dimension<"N"> {} dim_amount_of_substance;
inline constexpr struct dim_luminous_intensity final : base_dimension<"J"> {} dim_luminous_intensity;

inline constexpr struct second final : named_unit<"s", kind_of<isq::time>> {} second;
inline constexpr struct metre final : named_unit<"m", kind_of<isq::length>> {} metre;
inline constexpr struct gram final : named_unit<"g", kind_of<isq::mass>> {} gram;
inline constexpr auto kilogram = kilo<gram>;

inline constexpr struct newton final : named_unit<"N", kilogram * metre / square(second)> {} newton;
inline constexpr struct joule final : named_unit<"J", newton * metre> {} joule;
inline constexpr struct watt final : named_unit<"W", joule / second> {} watt;
inline constexpr struct coulomb final : named_unit<"C", ampere * second> {} coulomb;
inline constexpr struct volt final : named_unit<"V", watt / ampere> {} volt;
inline constexpr struct farad final : named_unit<"F", coulomb / volt> {} farad;
inline constexpr struct ohm final : named_unit<{u8"Ω", "ohm"}, volt / ampere> {} ohm;

template<PrefixableUnit U> struct micro_ : prefixed_unit<{u8"µ", "u"}, mag_power<10, -6>, U{}> {};
template<PrefixableUnit U> struct milli_ : prefixed_unit<"m", mag_power<10, -3>, U{}> {};
template<PrefixableUnit U> struct centi_ : prefixed_unit<"c", mag_power<10, -2>, U{}> {};
template<PrefixableUnit U> struct deci_  : prefixed_unit<"d", mag_power<10, -1>, U{}> {};
template<PrefixableUnit U> struct deca_  : prefixed_unit<"da", mag_power<10, 1>, U{}> {};
template<PrefixableUnit U> struct hecto_ : prefixed_unit<"h", mag_power<10, 2>, U{}> {};
template<PrefixableUnit U> struct kilo_  : prefixed_unit<"k", mag_power<10, 3>, U{}> {};
template<PrefixableUnit U> struct mega_  : prefixed_unit<"M", mag_power<10, 6>, U{}> {};

inline constexpr struct hyperfine_structure_transition_frequency_of_cs final : named_unit<{u8"Δν_Cs", "dv_Cs"}, mag<9'192'631'770> * hertz> {} hyperfine_structure_transition_frequency_of_cs;
inline constexpr struct speed_of_light_in_vacuum final : named_unit<"c", mag<299'792'458> * metre / second> {} speed_of_light_in_vacuum;
inline constexpr struct planck_constant final : named_unit<"h", mag_ratio<662'607'015, 100'000'000> * mag_power<10, -34> * joule * second> {} planck_constant;
inline constexpr struct elementary_charge final : named_unit<"e", mag_ratio<1'602'176'634, 1'000'000'000> * mag_power<10, -19> * coulomb> {} elementary_charge;
inline constexpr struct boltzmann_constant final : named_unit<"k", mag_ratio<1'380'649, 1'000'000> * mag_power<10, -23> * joule / kelvin> {} boltzmann_constant;
inline constexpr struct avogadro_constant final : named_unit<"N_A", mag_ratio<602'214'076, 100'000'000> * mag_power<10, 23> / mole> {} avogadro_constant;
inline constexpr struct luminous_efficacy final : named_unit<"K_cd", mag<683> * lumen / watt> {} luminous_efficacy;

Important

Two symbols always have to be provided if the primary symbol contains characters outside of the basic literal character set. The first must be provided as a UTF-8 literal and may contain any Unicode characters. The second one must provide an alternative spelling and only use characters from within of basic literal character set.

Note

Unicode provides only a minimal set of characters available as subscripts, which are often used to differentiate various constants and quantities of the same kind. To workaround this issue, mp-units uses the '_' character to specify that the following characters should be considered a subscript of the symbol.

Tip

For older compilers, it might be required to specify a symbol_text class explicitly template name to initialize it with two symbols:

inline constexpr struct ohm final : named_unit<symbol_text{u8"Ω", "ohm"}, volt / ampere> {} ohm;

Symbols for derived entities¶

`text_encoding`¶

ISQ and SI standards always specify symbols using Unicode encoding. This is why it is a default and primary target for text output. However, in some applications or environments, a standard ASCII-like text output using only the characters from the basic literal character set can be preferred by users.

This is why the library provides an option to change the default encoding to the ASCII one with:

enum class text_encoding : std::int8_t {
  unicode,  // µs; m³;  L²MT⁻³
  ascii,    // us; m^3; L^2MT^-3
  default_encoding = unicode
};

Symbols of derived dimensions¶

`dimension_symbol_formatting`¶

dimension_symbol_formatting is a data type describing the configuration of the symbol generation algorithm.

struct dimension_symbol_formatting {
  text_encoding encoding = text_encoding::default_encoding;
};

`dimension_symbol()`¶

Returns a std::string_view with the symbol of a dimension for the provided configuration:

template<dimension_symbol_formatting fmt = dimension_symbol_formatting{}, typename CharT = char, Dimension D>
[[nodiscard]] consteval std::string_view dimension_symbol(D);

For example:

static_assert(dimension_symbol<{.encoding = text_encoding::ascii}>(isq::power.dimension) == "L^2MT^-3");

Note

std::string_view is returned only when C++23 is available. Otherwise, an instance of a basic_fixed_string is being returned.

`dimension_symbol_to()`¶

Inserts the generated dimension symbol into the output text iterator at runtime.

template<typename CharT = char, std::output_iterator<CharT> Out, Dimension D>
constexpr Out dimension_symbol_to(Out out, D d, dimension_symbol_formatting fmt = dimension_symbol_formatting{});

For example:

std::string txt;
dimension_symbol_to(std::back_inserter(txt), isq::power.dimension, {.encoding = text_encoding::ascii});
std::cout << txt << "\n";

The above prints:

L^2MT^-3

Symbols of derived units¶

`unit_symbol_formatting`¶

unit_symbol_formatting is a data type describing the configuration of the symbol generation algorithm. It contains three orthogonal fields, each with a default value.

enum class unit_symbol_solidus : std::int8_t {
  one_denominator,  // m/s;   kg m⁻¹ s⁻¹
  always,           // m/s;   kg/(m s)
  never,            // m s⁻¹; kg m⁻¹ s⁻¹
  default_denominator = one_denominator
};

enum class unit_symbol_separator : std::int8_t {
  space,          // kg m²/s²
  half_high_dot,  // kg⋅m²/s²  (valid only for unicode encoding)
  default_separator = space
};

struct unit_symbol_formatting {
  text_encoding encoding = text_encoding::default_encoding;
  unit_symbol_solidus solidus = unit_symbol_solidus::default_denominator;
  unit_symbol_separator separator = unit_symbol_separator::default_separator;
};

unit_symbol_solidus impacts how the division of unit symbols is being presented in the text output. By default, the '/' will be printed if only one unit component is in the denominator. Otherwise, the exponent syntax will be used.

unit_symbol_separator specifies how multiple multiplied units should be separated from each other. By default, the space (' ') will be used as a separator.

`unit_symbol()`¶

Returns a std::string_view with the symbol of a unit for the provided configuration:

template<unit_symbol_formatting fmt = unit_symbol_formatting{}, typename CharT = char, Unit U>
[[nodiscard]] consteval std::string_view unit_symbol(U);

For example:

static_assert(unit_symbol<{.solidus = unit_symbol_solidus::never,
                           .separator = unit_symbol_separator::half_high_dot}>(kg * m / s2) == "kg⋅m⋅s⁻²");

Note

std::string_view is returned only when C++23 is available. Otherwise, an instance of a basic_fixed_string is being returned. See more in the C++ compiler support chapter.

`unit_symbol_to()`¶

Inserts the generated unit symbol into the output text iterator at runtime.

template<typename CharT = char, std::output_iterator<CharT> Out, Unit U>
constexpr Out unit_symbol_to(Out out, U u, unit_symbol_formatting fmt = unit_symbol_formatting{});

For example:

std::string txt;
unit_symbol_to(std::back_inserter(txt), kg * m / s2,
               {.solidus = unit_symbol_solidus::never, .separator = unit_symbol_separator::half_high_dot});
std::cout << txt << "\n";

The above prints:

kg⋅m⋅s⁻²

`space_before_unit_symbol` customization point¶

The SI Brochure says:

SI Brochure

The numerical value always precedes the unit and a space is always used to separate the unit from the number. ... The only exceptions to this rule are for the unit symbols for degree, minute and second for plane angle, °, ′ and ″, respectively, for which no space is left between the numerical value and the unit symbol.

There are more units with such properties. For example, percent (%) and per mille(‰).

To support the above and other similar cases, the library exposes space_before_unit_symbol customization point. By default, its value is true for all the units, so the space between a number and a unit will be inserted in the output text. To change this behavior, we have to provide a partial specialization for a specific unit:

template<>
inline constexpr bool space_before_unit_symbol<non_si::degree> = false;

Note

The above works only for the default formatting or for the format strings that use %? placement field (std::format("{}", q) is equivalent to std::format("{:%N%?%U}", q)).

In case a user provides custom format specification (e.g., std::format("{:%N %U}", q)), the library will always obey this specification for all the units (no matter what the actual value of the space_before_unit_symbol customization point is) and the separating space will always be used in this case.

Output streams¶

Tip

The output streaming support is opt-in and can be enabled by including the <mp-units/ostream.h> header file.

The easiest way to print a dimension, unit, or quantity is to provide its object to the output stream:

const QuantityOf<isq::speed> auto v1 = avg_speed(220. * km, 2 * h);
const QuantityOf<isq::speed> auto v2 = avg_speed(140. * mi, 2 * h);
std::cout << v1 << '\n';            // 110 km/h
std::cout << v2 << '\n';            // 70 mi/h
std::cout << v2.unit << '\n';       // mi/h
std::cout << v2.dimension << '\n';  // LT⁻¹

The text output will always print the value using the default formatting for this entity.

Important: Don't assume a unit

Remember that when we deal with a quantity of an "unknown" (e.g., auto) type, it is a good practice to always convert the unit to the expected one before passing it to the text output:

std::cout << v1.in(km / h) << '\n';       // 110 km/h
std::cout << v1.force_in(m / s) << '\n';  // 30.5556 m/s

Output stream formatting¶

Only basic formatting can be applied to output streams. It includes control over width, fill, and alignment.

The numerical value of the quantity will be printed according to the current stream state and standard manipulators may be used to customize that (assuming that the underlying representation type respects them).

std::cout << "|" << std::setw(10) << 123 * m << "|\n";                       // |     123 m|
std::cout << "|" << std::setw(10) << std::left << 123 * m << "|\n";          // |123 m     |
std::cout << "|" << std::setw(10) << std::setfill('*') << 123 * m << "|\n";  // |123 m*****|

Note

To have more control over the formatting of the quantity that is printed with the output stream just use std::cout << std::format(...).

Text formatting¶

The library provides custom formatters for std::format facility, which allows fine-grained control over what and how it is being printed in the text output.

Tip

The text formatting facility support is opt-in and can be enabled by including the <mp-units/format.h> header file.

Controlling width, fill, and alignment¶

Formatting grammar for all the entities provides control over width, fill, and alignment. The C++ standard grammar tokens fill-and-align and width are being used. They treat the entity as a contiguous text to be aligned. For example, here are a few examples of the quantity numerical value and symbol formatting:

std::println("|{:0}|", 123 * m);     // |123 m|
std::println("|{:10}|", 123 * m);    // |     123 m|
std::println("|{:<10}|", 123 * m);   // |123 m     |
std::println("|{:>10}|", 123 * m);   // |     123 m|
std::println("|{:^10}|", 123 * m);   // |  123 m   |
std::println("|{:*<10}|", 123 * m);  // |123 m*****|
std::println("|{:*>10}|", 123 * m);  // |*****123 m|
std::println("|{:*^10}|", 123 * m);  // |**123 m***|

It is important to note that in the second line above, the quantity text is aligned to the right by default, which is consistent with the formatting of numeric types. Units and dimensions behave as text and, thus, are aligned to the left by default.

Note

std::println is a C++23 facility. In case we do not have access to C++23, we can obtain the same output with:

std::cout << std::format("<format-string>\n", <format-args>);

Dimension formatting¶

dimension-format-spec = [fill-and-align], [width], [dimension-spec];
dimension-spec        = [text-encoding];
text-encoding         = 'U' | 'A';

In the above grammar:

fill-and-align and width tokens are defined in the format.string.std chapter of the C++ standard specification,
text-encoding token specifies the symbol text encoding:
- U (default) uses the Unicode symbols defined by [@ISO80000] (e.g., LT⁻²),
- A forces non-standard ASCII-only output (e.g., LT^-2).

Dimension symbols of some quantities are specified to use Unicode signs by the ISQ (e.g., Θ symbol for the thermodynamic temperature dimension). The library follows this by default. From the engineering point of view, sometimes Unicode text might not be the best solution, as terminals of many (especially embedded) devices can output only letters from the basic literal character set. In such a case, the dimension symbol can be forced to be printed using such characters thanks to text-encoding token:

std::println("{}", isq::dim_thermodynamic_temperature);   // Θ
std::println("{:A}", isq::dim_thermodynamic_temperature); // O
std::println("{}", isq::power.dimension);                 // L²MT⁻³
std::println("{:A}", isq::power.dimension);               // L^2MT^-3

Unit formatting¶

unit-format-spec      = [fill-and-align], [width], [unit-spec];
unit-spec             = [text-encoding], [unit-symbol-solidus], [unit-symbol-separator], [L]
                      | [text-encoding], [unit-symbol-separator], [unit-symbol-solidus], [L]
                      | [unit-symbol-solidus], [text-encoding], [unit-symbol-separator], [L]
                      | [unit-symbol-solidus], [unit-symbol-separator], [text-encoding], [L]
                      | [unit-symbol-separator], [text-encoding], [unit-symbol-solidus], [L]
                      | [unit-symbol-separator], [unit-symbol-solidus], [text-encoding], [L];
unit-symbol-solidus   = '1' | 'a' | 'n';
unit-symbol-separator = 's' | 'd';

In the above grammar:

fill-and-align and width tokens are defined in the format.string.std chapter of the C++ standard specification,
unit-symbol-solidus token specifies how the division of units should look like:
- '1' (default) outputs / only when there is only one unit in the denominator, otherwise negative exponents are printed (e.g., m/s, kg m⁻¹ s⁻¹)
- 'a' always uses solidus (e.g., m/s, kg/(m s))
- 'n' never prints solidus, which means that negative exponents are always used (e.g., m s⁻¹, kg m⁻¹ s⁻¹)
unit-symbol-separator token specifies how multiplied unit symbols should be separated:
- 's' (default) uses space as a separator (e.g., kg m²/s²)
- 'd' uses half-high dot (⋅) as a separator (e.g., kg⋅m²/s²) (requires the Unicode encoding)
'L' is reserved for possible future localization use in case the C++ standard library gets access to the ICU-like database.

Note

The above grammar intended that the elements of unit-spec can appear in any order as they have unique characters. Users shouldn't have to remember the order of those tokens to control the formatting of a unit symbol.

Unit symbols of some quantities are specified to use Unicode signs by the SI (e.g., Ω symbol for the resistance quantity). The library follows this by default. From the engineering point of view, Unicode text might not be the best solution sometimes, as terminals of many (especially embedded) devices can output only letters from the basic literal character set. In such a case, the unit symbol can be forced to be printed using such characters thanks to text-encoding token:

std::println("{}", si::ohm);      // Ω
std::println("{:A}", si::ohm);    // ohm
std::println("{}", us);           // µs
std::println("{:A}", us);         // us
std::println("{}", m / s2);       // m/s²
std::println("{:A}", m / s2);     // m/s^2

Additionally, both ISO 80000 and SI leave some freedom on how to print unit symbols. This is why two additional tokens were introduced.

unit-symbol-solidus specifies how the division of units should look like. By default, / will be used only when the denominator contains only one unit. However, with the 'a' or 'n' options, we can force the facility to print the / character always (even when there are more units in the denominator), or never, in which case a parenthesis will be added to enclose all denominator units.

std::println("{}", m / s);          // m/s
std::println("{}", kg / m / s2);    // kg m⁻¹ s⁻²
std::println("{:a}", m / s);        // m/s
std::println("{:a}", kg / m / s2);  // kg/(m s²)
std::println("{:n}", m / s);        // m s⁻¹
std::println("{:n}", kg / m / s2);  // kg m⁻¹ s⁻²

Also, there are a few options to separate the units being multiplied. ISO 80000 (part 1) says:

ISO 80000-1

When symbols for quantities are combined in a product of two or more quantities, this combination is indicated in one of the following ways: ab, a b, a · b, a × b

NOTE 1 In some fields, e.g., vector algebra, distinction is made between a ∙ b and a × b.

The library supports a b and a · b only. Additionally, we decided that the extraneous space in the latter case makes the result too verbose, so we decided just to use the · symbol as a separator.

Note

Please let us know if you require more formatting options here.

The unit-symbol-separator token allows us to obtain the following outputs:

std::println("{}", kg * m2 / s2);    // kg m²/s²
std::println("{:d}", kg * m2 / s2);  // kg⋅m²/s²

Note

'd' requires the Unicode encoding to be set.

Quantity formatting¶

quantity-format-spec        = [fill-and-align], [width], [quantity-specs], [defaults-specs];
quantity-specs              = conversion-spec;
                            | quantity-specs, conversion-spec;
                            | quantity-specs, literal-char;
literal-char                = ? any character other than '{', '}', or '%' ?;
conversion-spec             = '%', placement-type;
placement-type              = subentity-id | '?' | '%';
defaults-specs              = ':', default-spec-list;
default-spec-list           = default-spec;
                            | default-spec-list, default-spec;
default-spec                = subentity-id, '[' format-spec ']';
subentity-id                = 'N' | 'U' | 'D';
format-spec                 = ? as specified by the formatter for the argument type ?;

In the above grammar:

fill-and-align and width tokens are defined in the format.string.std chapter of the C++ standard specification,
placement-type token specifies which entity should be put and where:
- 'N' inserts a default-formatted numerical value of the quantity,
- 'U' inserts a default-formatted unit of the quantity,
- 'D' inserts a default-formatted dimension of the quantity,
- '?' inserts an optional separator between the number and a unit based on the value of space_before_unit_symbol for this unit,
- '%' just inserts '%' character.
defaults-specs token allows overwriting defaults for the underlying formatters with the custom format string. Each override starts with a subentity identifier ('N', 'U', or 'D') followed by the format string enclosed in square brackets.

Default formatting¶

To format quantity values, the formatting facility uses quantity-format-spec. If left empty, the default formatting is applied. The same default formatting is also applied to the output streams. This is why the following code lines produce the same output:

std::cout << "Distance: " << 123 * km << "\n";
std::cout << std::format("Distance: {}\n", 123 * km);
std::cout << std::format("Distance: {:%N%?%U}\n", 123 * km);

Note

For some quantities, the {:%N %U} format may provide a different output than the default one, as some units have space_before_unit_symbol customization point explicitly set to false (e.g., % and °).

Quantity numerical value, unit symbol, or both?¶

Thanks to the grammar provided above, the user can easily decide to either:

print a whole quantity:

std::println("Speed: {}", 120 * km / h);

Speed: 120 km/h

provide custom quantity formatting:

std::println("Speed: {:%N in %U}", 120 * km / h);

Speed: 120 in km/h

provide custom formatting for components:

std::println("Speed: {::N[.2f]U[n]}", 100. * km / (3 * h));

Speed: 33.33 km h⁻¹

print only specific components (numerical value, unit, or dimension):

std::println("Speed:\n- number: {0:%N}\n- unit: {0:%U}\n- dimension: {0:%D}", 120 * km / h);

Speed:
- number: 120
- unit: km/h
- dimension: LT⁻¹

Formatting of the quantity numerical value¶

The representation type used as a numerical value of a quantity must provide its own formatter specialization. It will be called by the quantity formatter with the format-spec provided by the user in the N defaults specification.

In case we use C++ fundamental arithmetic types with our quantities the standard formatter specified in format.string.std will be used. The rest of this chapter assumes that it is the case and provides some usage examples.

sign token allows us to specify how the value's sign is being printed:

std::println("{0},{0::N[+]},{0::N[-]},{0::N[ ]}", 1 * m);   // 1 m,+1 m,1 m, 1 m
std::println("{0},{0::N[+]},{0::N[-]},{0::N[ ]}", -1 * m);  // -1 m,-1 m,-1 m,-1 m

where:

+ indicates that a sign should be used for both non-negative and negative numbers,
- indicates that a sign should be used for negative numbers and negative zero only (this is the default behavior),
<space> indicates that a leading space should be used for non-negative numbers other than negative zero, and a minus sign for negative numbers and negative zero.

precision token is allowed only for floating-point representation types:

std::println("{::N[.0]}", 1.2345 * m);   // 1 m
std::println("{::N[.1]}", 1.2345 * m);   // 1 m
std::println("{::N[.2]}", 1.2345 * m);   // 1.2 m
std::println("{::N[.3]}", 1.2345 * m);   // 1.23 m
std::println("{::N[.0f]}", 1.2345 * m);  // 1 m
std::println("{::N[.1f]}", 1.2345 * m);  // 1.2 m
std::println("{::N[.2f]}", 1.2345 * m);  // 1.23 m

type specifies how a value of the representation type is being printed. For integral types:

std::println("{::N[b]}", 42 * m);    // 101010 m
std::println("{::N[B]}", 42 * m);    // 101010 m
std::println("{::N[d]}", 42 * m);    // 42 m
std::println("{::N[o]}", 42 * m);    // 52 m
std::println("{::N[x]}", 42 * m);    // 2a m
std::println("{::N[X]}", 42 * m);    // 2A m

The above can be printed in an alternate version thanks to the # token:

std::println("{::N[#b]}", 42 * m);   // 0b101010 m
std::println("{::N[#B]}", 42 * m);   // 0B101010 m
std::println("{::N[#o]}", 42 * m);   // 052 m
std::println("{::N[#x]}", 42 * m);   // 0x2a m
std::println("{::N[#X]}", 42 * m);   // 0X2A m

For floating-point values, the type token works as follows:

std::println("{::N[a]}",   1.2345678 * m);      // 1.3c0ca2a5b1d5dp+0 m
std::println("{::N[.3a]}", 1.2345678 * m);      // 1.3c1p+0 m
std::println("{::N[A]}",   1.2345678 * m);      // 1.3C0CA2A5B1D5DP+0 m
std::println("{::N[.3A]}", 1.2345678 * m);      // 1.3C1P+0 m
std::println("{::N[e]}",   1.2345678 * m);      // 1.234568e+00 m
std::println("{::N[.3e]}", 1.2345678 * m);      // 1.235e+00 m
std::println("{::N[E]}",   1.2345678 * m);      // 1.234568E+00 m
std::println("{::N[.3E]}", 1.2345678 * m);      // 1.235E+00 m
std::println("{::N[g]}",   1.2345678 * m);      // 1.23457 m
std::println("{::N[g]}",   1.2345678e8 * m);    // 1.23457e+08 m
std::println("{::N[.3g]}", 1.2345678 * m);      // 1.23 m
std::println("{::N[.3g]}", 1.2345678e8 * m);    // 1.23e+08 m
std::println("{::N[G]}",   1.2345678 * m);      // 1.23457 m
std::println("{::N[G]}",   1.2345678e8 * m);    // 1.23457E+08 m
std::println("{::N[.3G]}", 1.2345678 * m);      // 1.23 m
std::println("{::N[.3G]}", 1.2345678e8 * m);    // 1.23E+08 m

Text Output¶

Predefined symbols¶

Symbols for derived entities¶

text_encoding¶

Symbols of derived dimensions¶

dimension_symbol_formatting¶

dimension_symbol()¶

dimension_symbol_to()¶

Symbols of derived units¶

unit_symbol_formatting¶

unit_symbol()¶

unit_symbol_to()¶

space_before_unit_symbol customization point¶

Output streams¶

Output stream formatting¶

Text formatting¶

Controlling width, fill, and alignment¶

Dimension formatting¶

Unit formatting¶

Quantity formatting¶

Default formatting¶

Quantity numerical value, unit symbol, or both?¶

Formatting of the quantity numerical value¶

`text_encoding`¶

`dimension_symbol_formatting`¶

`dimension_symbol()`¶

`dimension_symbol_to()`¶

`unit_symbol_formatting`¶

`unit_symbol()`¶

`unit_symbol_to()`¶

`space_before_unit_symbol` customization point¶